| Dana 30 Advantek M186 Front | |
| Ring Gear Bolts (3/8"-24) | 70 to 90 ft-lbs (Grade 9) |
| Pinion Torque to Rotate (PTR) | 8.2 to 27.5 in-lbs (Pinion Only) |
| Pinion Nut (Crush Sleeve) | Tighten Until PTR Achieved (≈ 160+ ft-lbs) |
| Total Torque to Rotate (Pinion + Carrier) |
4.56 Gear Ratio = PTR + 2.4 to 6.8 in-lbs 4.88 Gear Ratio = PTR + 2.1 to 6.5 in-lbs 5.13 Gear Ratio = PTR + 1.9 to 6.4 in-lbs 5.38 Gear Ratio = PTR + 1.8 to 6.3 in-lbs |
| Backlash | .006 to .010 |
| Carrier Caps | 70 to 90 ft-lbs |
| Cover Bolts | 30 to 35 ft-lbs |
| Dana 44 AdvanTEK M210 Front | |
| Ring Gear Bolts (M12 x 1.25) | 135 to 155 ft-lbs (Class 12.9) |
| Pinion Torque to Rotate (PTR) | 13.4 to 29.4 in-lbs (Pinion Only) |
| Pinion Nut (Crush Sleeve) | Tighten Until PTR Achieved (≈ 160+ ft-lbs) |
| Total Torque to Rotate (Pinion + Carrier) |
4.56 Gear Ratio = PTR + 2.8 to 8.4 in-lbs 4.88 Gear Ratio = PTR + 2.3 to 6.7 in-lbs 5.13 Gear Ratio = PTR + 1.9 to 6.4 in-lbs 5.38 Gear Ratio = PTR + 1.7 to 6.1 in-lbs |
| Backlash | .006 to .010 |
| Carrier Caps | 67 to 73 ft-lbs |
| Cover Bolts | 30 to 35 ft-lbs |
| Dana 44 AdvanTEK M220 Rear | |
| Ring Gear Bolts (M12 x 1.25) | 135 to 155 ft-lbs (Class 12.9) |
| Pinion Torque to Rotate (PTR) | 13.6 to 21.4 in-lbs (Pinion Only) |
| Pinion Nut (Crush Sleeve) | Tighten Until PTR Achieved (≈ 160+ ft-lbs) |
| Total Torque to Rotate (Pinion + Carrier) |
4.56 Gear Ratio = PTR + 7.60 to 14.35 in-lbs 4.88 Gear Ratio = PTR + 7.10 to 13.40 in-lbs 5.13 Gear Ratio = PTR + 6.75 to 12.75 in-lbs 5.38 Gear Ratio = PTR + 6.50 to 12.10 in-lbs |
| Backlash | .006 to .010 |
| Carrier Caps | 67 to 73 ft-lbs |
| Cover Bolts | 30 to 35 ft-lbs |