Vehicle Fitment
|
2020 and Newer Jeep Gladiator Truck |
Portal Assemblies
|
___________________________________________________________________________________ |
Gear Reduction
|
Portal gear reduction = 1.22:1 ( 4.10 installed ratio X 1.22 = 5.00 effective gear ratio) |
Ground Clearance
|
Adds 3.9 inches of ground clearance under the axle housing |
Wheel Bolt Pattern
|
8-lug (8 x 6.5 in.) with 9/16 studs |
Unit Bearings
|
1-ton unit bearings with JL/JT tone rings installed for ABS and ESP retention |
Brake Rotors
|
Front - 14-inch vented rotors, Rear - 13.75-inch vented rotors |
Brake Calipers
|
Retains the vehicles front and rear OEM calipers |
Portal Oil Capacity
|
10 oz of 75W-90 synthetic GL5 gear oil (Maxima Pro Gear Recommended) |
Currie 44 Hybrid Front Axle
|
___________________________________________________________________________________ |
Center Section
|
Currie 44 high-pinion nodular-iron center section with thick walls and webbing, Currie LP60 nodular Iron low-pinion center section with thick walls and webbing with reinforcement in critical areas |
Gear Set
|
Larger/stronger Dana 44™ 8.8” late model JK ring and pinion set, Standard Dana 60™ low-pinion |
Pinion Yoke
|
1310 (stock size) pinion companion flange, 1350 u-joint |
Axles
|
Currie Performance 4340 chromoly 30/32-spline inner/outer axles, Currie Performance 35-spline full-float chromoly axles |
Axle Tubes
|
3 in.diameter, .5 in. wall DOM tube, 3.5 in. diameter x .375 in. wall DOM tube |
End Forgings
|
Currie 1-ton heavy-duty forged steel inner C’s |
Ball Joints
|
1-ton Super 60 Ball Joints |
Control Arm Mounts
|
Upper control and lower control arm mounts are 3/16 thick, one-piece construction; lower mounts feature an integrated skid plate |
Geometry
|
Optimized for stock height or lifted vehicles with 5 degrees of pinion angle to reduce driveshaft angle and 5 degrees of caster for improved steering |
Width
|
Axle width with portals installed is 73.25 inches, 71-Inch effective width with 25 mm positive offset wheels (approximately a 5.5-inch backspace), Axle width with portals installed is 73.25 inches, 71-Inch effective width with 25 mm positive offset wheels (approximately a 5.5-inch backspace) |
Differential Cover
|
Currie nodular-iron cover with gasketed fill plug with dip stick |
Oil Capacity
|
2.0 quarts of 75W-140 synthetic gear oil (API GL-5 Rated), 3.0 quarts of 75W-140 synthetic gear oil (API GL-5 Rated) |
Finish
|
Black satin powder coat, Black satin powder coat |
Currie HD60 Rear Axle
|
___________________________________________________________________________________ |
Suspension Brackets
|
Heavy gauge 3/16” steel mounting brackets |
Parking Brake
|
Wilwood mechanical calipers |