| Vehicle Fitment | 2018 and newer Jeep Wrangler JL |
| Portal Assemblies | ___________________________________________________________________________________ |
| Gear Reduction | Portal gear reduction = 1.22:1 ( 4.10 installed ratio X 1.22 = 5.00 effective gear ratio) |
| Ground Clearance | Adds 3.9 inches of ground clearance under the axle housing |
| Wheel Bolt Pattern | 8-lug (8 x 6.5 in.) with 9/16 studs |
| Unit Bearings | 1-ton unit bearings with JL/JT tone rings installed for ABS and ESP retention |
| Brake Rotors | Front - 14-inch vented rotors, Rear - 13.75-inch vented rotors |
| Brake Calipers | Retains the vehicles front and rear OEM calipers |
| Portal Oil Capacity | 10 oz of 75W-90 synthetic GL5 gear oil (Maxima Pro Gear Recommended) |
| Currie 44 Hybrid Front Axle | ___________________________________________________________________________________ |
| Center Section | Currie 44 high-pinion nodular-iron center section with thick walls and webbing, Currie LP60 nodular Iron low-pinion center section with thick walls and webbing with reinforcement in critical areas |
| Gear Set | Larger/stronger Dana 44™ 8.8” late model JK ring and pinion set, Standard Dana 60™ low-pinion |
| Pinion Yoke | 1310 (stock size) pinion companion flange, 1350 u-joint |
| Axles | Currie Performance 4340 chromoly 30/32-spline inner/outer axles, Currie Performance 35-spline full-float chromoly axles |
| Axle Tubes | 3 in.diameter, .5 in. wall DOM tube, 3.5 in. diameter x .375 in. wall DOM tube |
| End Forgings | Currie 1-ton heavy-duty forged steel inner C’s |
| Ball Joints | 1-ton Super 60 Ball Joints |
| Control Arm Mounts | Upper control and lower control arm mounts are 3/16 thick, one-piece construction; lower mounts feature an integrated skid plate |
| Geometry | Optimized for stock height or lifted vehicles with 5 degrees of pinion angle to reduce driveshaft angle and 5 degrees of caster for improved steering |
| Width | Axle width with portals installed is 73.25 inches, 71-Inch effective width with 25 mm positive offset wheels (approximately a 5.5-inch backspace), Axle width with portals installed is 73.25 inches, 71-Inch effective width with 25 mm positive offset wheels (approximately a 5.5-inch backspace) |
| Differential Cover | Currie nodular-iron cover with gasketed fill plug with dip stick |
| Oil Capacity | 2.0 quarts of 75W-140 synthetic gear oil (API GL-5 Rated), 3.0 quarts of 75W-140 synthetic gear oil (API GL-5 Rated) |
| Finish | Black satin powder coat, Black satin powder coat |
| Currie HD60 Rear Axle | ___________________________________________________________________________________ |
| Suspension Brackets | Heavy gauge 3/16” steel mounting brackets |
| Parking Brake | Wilwood mechanical calipers |