Menu
Search
Filters
Close
Menu

Currie 44 - Fits 1997-2006 Jeep TJ/LJ/XJ - Front Axle - 5.38 Gear Ratio - Eaton ELocker - CE-JF4404E53

  • Home /
  • Jeep Axle Index /
  • Currie 44 - Fits 1997-2006 Jeep TJ/LJ/XJ - Front Axle - 5.38 Gear Ratio - Eaton ELocker - CE-JF4404E53

The Currie 44 front axle assembly is a direct bolt-in assembly for 1997 thru 2006 Jeep Wrangler TJ/LJ and 1984 thru 2001 Cherokee XJ. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.


Currie 44 Features:

  • Direct Bolt-in Fit for Wrangler TJ/LJ/XJ
  • Stock TJ 60.5 in. Overall Width
  • 5.38 Gear Ratio
  • Eaton ELocker
  • Currie High-Pinion Reinforced Center Section
  • 3 in. Diameter, .5 in. Wall DOM Axle Tubes
  • Currie Forged TJ Inner Knuckles
  • 4340 Chromoly Inner and Outer Axles
  • Steering Geometry and Brackets Setup for Stock Height or Lifted Vehicles
  • Satin Black Powder Coat Finish for Long Lasting Protection
  • Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels

*** SELECT OPTIONS TO BUILD AND PRICE ***

SKU: CE-JF4404E53
*
$5,850.00

The Currie 44 front crate axle is a direct bolt-in solution that reduces the overall cost by enabling you to retain the complete stock TJ outer knuckle assemblies (brakes, hubs, etc.) and stock wheel bolt pattern.

 

Currie 44 Front Axle Features

  Currie 44 high-pinion nodular iron center section features 14 lbs of reinforcement over a stock 44 with thicker walls and webbing to deliver superior strength and rigidity
     
  Large 3 in. diameter x .5 in. wall axle tubes (left) are more than 2.5 times stronger than the stock Dana® 30 tubes (right)
     
  Currie heavy-duty forged inner knuckles (right) are massively stronger than the stock knuckles (left) and are designed for severe off-road use with up to 37” tall tires
     
  Genuine Dana Spicer ball joints provide original equipment quality, consistency, and long, maintenance-free service life
     
  Currie Performance 4340 chromoly axles provide superior end-to-end strength over OEM carbon steel axles. Black oxide coating helps protect from surface corrosion for improved durability
     
  Rock-proof Currie nodular iron front cover protects expensive internals and adds structural support to the housing's face flange
     
  UV Stabel Satin black powder coat finish adds long-lasting protection against rust and corrosion to keep your Currie 44 looking its best

 

 

Notes

Outer Knuckle Assemblies: The Currie 44 is designed to reuse the complete stock TJ/TJ/XJ outer knuckle assemblies from the ball joints out (knuckles, hubs, disk brake calipers, and rotors)

Differential Carriers: The center section is designed to use standard Dana 44 carriers (ARB RD117 or Eaton Elocker 19977-010).

Overall Width: Axle width is 60.5 inches (stock TJ width) between wheel mounting surfaces

Tire Size: Recommended maximum 37-inch tire size due to the inherent limitations of the stock brakes, wheel bearings, and axle u-joints. Tires larger than 31 inches may require vehicle modification for proper clearance.

The Currie 44 front crate axle is a direct bolt-in solution that reduces the overall cost by enabling you to retain the complete stock TJ outer knuckle assemblies (brakes, hubs, etc.) and stock wheel bolt pattern.

 

Currie 44 Front Axle Features

  Currie 44 high-pinion nodular iron center section features 14 lbs of reinforcement over a stock 44 with thicker walls and webbing to deliver superior strength and rigidity
     
  Large 3 in. diameter x .5 in. wall axle tubes (left) are more than 2.5 times stronger than the stock Dana® 30 tubes (right)
     
  Currie heavy-duty forged inner knuckles (right) are massively stronger than the stock knuckles (left) and are designed for severe off-road use with up to 37” tall tires
     
  Genuine Dana Spicer ball joints provide original equipment quality, consistency, and long, maintenance-free service life
     
  Currie Performance 4340 chromoly axles provide superior end-to-end strength over OEM carbon steel axles. Black oxide coating helps protect from surface corrosion for improved durability
     
  Rock-proof Currie nodular iron front cover protects expensive internals and adds structural support to the housing's face flange
     
  UV Stabel Satin black powder coat finish adds long-lasting protection against rust and corrosion to keep your Currie 44 looking its best

 

 

Notes

Outer Knuckle Assemblies: The Currie 44 is designed to reuse the complete stock TJ/TJ/XJ outer knuckle assemblies from the ball joints out (knuckles, hubs, disk brake calipers, and rotors)

Differential Carriers: The center section is designed to use standard Dana 44 carriers (ARB RD117 or Eaton Elocker 19977-010).

Overall Width: Axle width is 60.5 inches (stock TJ width) between wheel mounting surfaces

Tire Size: Recommended maximum 37-inch tire size due to the inherent limitations of the stock brakes, wheel bearings, and axle u-joints. Tires larger than 31 inches may require vehicle modification for proper clearance.

Products specifications
Vehicle Fitment 1997 thru 2006 Wrangler TJ/LJ and 1984 thru 2001 Cherokee XJ
Center Section Currie 44 high-pinion nodular-iron center section with thick walls and webbing
Gear Set Larger/stronger Dana 44 8.8 in. late model JK ring and pinion set
Pinion Yoke 1310 series yoke
Differential Cover Currie nodular-iron cover with gasketed fill plug with dipstick
Axle Tubes 3 in. diameter, .5 wall DOM tube
Axles Currie Performance 4340 chromoly 30/27-spline inner/outer axles with 1310 u-joints
End Forgings Currie heavy-duty forged D44 inner C's with ball joints installed
Ball Joints Spicer D44 ball joints
Suspension Brackets Heavy gauge 3/16” laser cut steel brackets
Control Arm Mounts Upper control and lower control arm mounts are 3/16 thick, one-piece construction; lower mounts feature an integrated skid plate
Geometry Optimized for 4” lift kit with 5 degrees of pinion angle to reduce driveshaft angle and 5 degrees of caster for improved steering
Width 60.5 inches between wheel mounting surfaces (stock TJ width)
Finish Satin Black Powder Coat
Product tags
Related products
Currie 4x4 Performance Gear Oil

Currie 4x4 Performance Gear Oil

$17.00

High-performance full-synthetic 75W-140, GL-5 gear oil designed specifically for the requirements of 4x4 Jeeps and trucks. Currie 4x4 Performance Gear Oil provides maximum shear stability and extreme pressure protection with a superior inhibitor package that protects against rust, corrosion and foaming.


Details:

  • 100% Synthetic Formula Provides Superior Shock, Load, and Wear Protection
  • Contains an Effective Inhibitor Package that Protects Against Rust and Corrosion
  • Extreme Pressure Chemistry Delivers 4 Times the Film Strength of Conventional Gear Oils
  • Reduces Operating Temperatures and Delivers Improved Efficiency
  • 75W-140 API GL-5 Rated
Currie Legacy Ring & Pinion Set for Dana 44 JK Rear, 4.56 thru 5.38 Ratios

Currie Legacy - JK Replacement Gears

$249.99 $212.49

Currie Legacy Gears for the 2007-1018 Jeep Wrangler JK are forged from 8620 alloy steel for the greatest strength, precision machined for exact factory fit and quiet operation. All Currie Legacy gears are CNC lapped for reduced friction and provide quiet operation, with additional attention to detail of hand dressing each gear to eliminate any possible burrs on gear tooth edges to improve the break-in process.


Details:

  • Fitment 2007-2018 Jeep JK Wrangler All Models
  • Dana 30 Front / Dana 44 Front / Dana 44 Rear
  • Available Ratios from 4.56 thru 5.13
  • Forged 8620 Alloy Material for Optimal Strength
  • CNC Lapped for Quite Operation
  • Hand Dressed to Eliminate Burrs
Related Products
Currie 4x4 Performance Gear Oil

Currie 4x4 Performance Gear Oil

$17.00

High-performance full-synthetic 75W-140, GL-5 gear oil designed specifically for the requirements of 4x4 Jeeps and trucks. Currie 4x4 Performance Gear Oil provides maximum shear stability and extreme pressure protection with a superior inhibitor package that protects against rust, corrosion and foaming.


Details:

  • 100% Synthetic Formula Provides Superior Shock, Load, and Wear Protection
  • Contains an Effective Inhibitor Package that Protects Against Rust and Corrosion
  • Extreme Pressure Chemistry Delivers 4 Times the Film Strength of Conventional Gear Oils
  • Reduces Operating Temperatures and Delivers Improved Efficiency
  • 75W-140 API GL-5 Rated
Currie Legacy Ring & Pinion Set for Dana 44 JK Rear, 4.56 thru 5.38 Ratios

Currie Legacy - JK Replacement Gears

$249.99 $212.49

Currie Legacy Gears for the 2007-1018 Jeep Wrangler JK are forged from 8620 alloy steel for the greatest strength, precision machined for exact factory fit and quiet operation. All Currie Legacy gears are CNC lapped for reduced friction and provide quiet operation, with additional attention to detail of hand dressing each gear to eliminate any possible burrs on gear tooth edges to improve the break-in process.


Details:

  • Fitment 2007-2018 Jeep JK Wrangler All Models
  • Dana 30 Front / Dana 44 Front / Dana 44 Rear
  • Available Ratios from 4.56 thru 5.13
  • Forged 8620 Alloy Material for Optimal Strength
  • CNC Lapped for Quite Operation
  • Hand Dressed to Eliminate Burrs
Customers Also Purchased
Currie Corona Tee - Front

Currie "Corona" T-Shirt

$20.00 $10.00

Details:

  • Men's White Short Sleeve Crew Neck
  • Solid Color
  • Front Logo Graphic Print
Womens Braid - Front

Currie "Braid" Womens V-Neck Tank Top

$15.00

Details:

  • Women's Lilac Tank Top
  • Scoop Neckline
  • White Graphic
  • Logo Graphic Print Front
Currie Performance Tee - Front

Currie "Performance" T-Shirt

$20.00

Details:

  • Men's Black Short Sleeve Crew Neck
  • Solid Color
  • Logo Graphic Print Front and Back
Currie Emblem Hoodie - Front

Currie "Emblem" Hoodie

$25.00

Details:

  • Men's Black Hooded Pullover Sweatshirt
  • Adjustable Drawstring Hood
  • Cuffed Long Sleeves
  • Kangaroo Pouch Pocket
  • Logo Graphic Print Front and Back





Categories
Popular tags
Contacts
  • +1 714-528-6957
  • +1 (Fax) 951-549-0267
Information
Copyright © 2024 Currie 4x4. All rights reserved.