Products tagged with 'ce-kf6503e45'

Extreme 60 - JK High-Pinion Front Axle Assembly

Currie Extreme 60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.88 Gear Ratio - Eaton ELocker - CE-KF6503E48

$9,850.00

The Currie Extreme 60 front axle for 2007 thru 2018 JK/JKU, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The Extreme 60 front features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, 35-spline chromoly axles, and 1-ton inner knuckles and outer steering assemblies that are fitted with massive brakes and 8-lug hubs. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle assembly is a natural choice. See below for the full details.

Details:

70-Inch Width Provides Clearance for Large Tires
4.88 Gear Ratio
Eaton ELocker
High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
3.5 x .375-inch DOM Axle Tubes Deliver Industry-Leading Strength
Hardened Steel Rock Slider Skid Plate Glides Over Rocks
1-Ton Forged Inner Knuckles and Nodular Iron Outer Knuckles with 8-Lug Hubs

Deliver Maximum Strength for Hard Wheeling with Large Tires
Currie Chromoly 35-Spline Inner and Outer Axles Provide End-to-End Strength
Big 14.25-Inch Vented Rotors and Master Cylinder-Matched Dual-Piston Calipers

Deliver Industry Leading Stopping Power with Factory Brake Pedal Feel
Chromoly Tie Rod with 1-Ton Rod Ends is Designed for Off-Road Abuse
Currie Rock-Proof Nodular Iron Differential Cover
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Satin Black Powder Coat Finish for Long Lasting Protection
Fully Assembled and Ready to Install

Currie Extreme 60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 5.13 Gear Ratio - Eaton ELocker - CE-KF6503E51

$9,850.00

The Currie Extreme 60 front axle for 2007 thru 2018 JK/JKU, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The Extreme 60 front features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, 35-spline chromoly axles, and 1-ton inner knuckles and outer steering assemblies that are fitted with massive brakes and 8-lug hubs. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle assembly is a natural choice. See below for the full details.

Details:

70-Inch Width Provides Clearance for Large Tires
5.13Gear Ratio
Eaton ELocker
High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
3.5 x .375-inch DOM Axle Tubes Deliver Industry-Leading Strength
Hardened Steel Rock Slider Skid Plate Glides Over Rocks
1-Ton Forged Inner Knuckles and Nodular Iron Outer Knuckles with 8-Lug Hubs

Deliver Maximum Strength for Hard Wheeling with Large Tires
Currie Chromoly 35-Spline Inner and Outer Axles Provide End-to-End Strength
Big 14.25-Inch Vented Rotors and Master Cylinder-Matched Dual-Piston Calipers

Deliver Industry Leading Stopping Power with Factory Brake Pedal Feel
Chromoly Tie Rod with 1-Ton Rod Ends is Designed for Off-Road Abuse
Currie Rock-Proof Nodular Iron Differential Cover
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Satin Black Powder Coat Finish for Long Lasting Protection
Fully Assembled and Ready to Install

Currie Extreme 60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 5.38 Gear Ratio - Eaton ELocker - CE-KF6503E53

$9,850.00

The Currie Extreme 60 front axle for 2007 thru 2018 JK/JKU, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The Extreme 60 front features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, 35-spline chromoly axles, and 1-ton inner knuckles and outer steering assemblies that are fitted with massive brakes and 8-lug hubs. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle assembly is a natural choice. See below for the full details.

Details:

70-Inch Width Provides Clearance for Large Tires
5.38 Gear Ratio
Eaton ELocker
High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
3.5 x .375-inch DOM Axle Tubes Deliver Industry-Leading Strength
Hardened Steel Rock Slider Skid Plate Glides Over Rocks
1-Ton Forged Inner Knuckles and Nodular Iron Outer Knuckles with 8-Lug Hubs

Deliver Maximum Strength for Hard Wheeling with Large Tires
Currie Chromoly 35-Spline Inner and Outer Axles Provide End-to-End Strength
Big 14.25-Inch Vented Rotors and Master Cylinder-Matched Dual-Piston Calipers

Deliver Industry Leading Stopping Power with Factory Brake Pedal Feel
Chromoly Tie Rod with 1-Ton Rod Ends is Designed for Off-Road Abuse
Currie Rock-Proof Nodular Iron Differential Cover
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Satin Black Powder Coat Finish for Long Lasting Protection
Fully Assembled and Ready to Install

Currie Extreme 60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.88 Gear Ratio - ARB Air Locker - CE-KF6503A48

$9,850.00

The Currie Extreme 60 front axle for 2007 thru 2018 JK/JKU, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The Extreme 60 front features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, 35-spline chromoly axles, and 1-ton inner knuckles and outer steering assemblies that are fitted with massive brakes and 8-lug hubs. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle assembly is a natural choice. See below for the full details.

Details:

70-Inch Width Provides Clearance for Large Tires
4.88 Gear Ratio
ARB Air Locker
High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
3.5 x .375-inch DOM Axle Tubes Deliver Industry-Leading Strength
Hardened Steel Rock Slider Skid Plate Glides Over Rocks
1-Ton Forged Inner Knuckles and Nodular Iron Outer Knuckles with 8-Lug Hubs

Deliver Maximum Strength for Hard Wheeling with Large Tires
Currie Chromoly 35-Spline Inner and Outer Axles Provide End-to-End Strength
Big 14.25-Inch Vented Rotors and Master Cylinder-Matched Dual-Piston Calipers

Deliver Industry Leading Stopping Power with Factory Brake Pedal Feel
Chromoly Tie Rod with 1-Ton Rod Ends is Designed for Off-Road Abuse
Currie Rock-Proof Nodular Iron Differential Cover
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Satin Black Powder Coat Finish for Long Lasting Protection
Fully Assembled and Ready to Install

Currie Extreme 60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 5.13 Gear Ratio - ARB Air Locker - CE-KF6503A51

$9,850.00

The Currie Extreme 60 front axle for 2007 thru 2018 JK/JKU, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The Extreme 60 front features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, 35-spline chromoly axles, and 1-ton inner knuckles and outer steering assemblies that are fitted with massive brakes and 8-lug hubs. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle assembly is a natural choice. See below for the full details.

Details:

70-Inch Width Provides Clearance for Large Tires
5.13 Gear Ratio
ARB Air Locker
High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
3.5 x .375-inch DOM Axle Tubes Deliver Industry-Leading Strength
Hardened Steel Rock Slider Skid Plate Glides Over Rocks
1-Ton Forged Inner Knuckles and Nodular Iron Outer Knuckles with 8-Lug Hubs

Deliver Maximum Strength for Hard Wheeling with Large Tires
Currie Chromoly 35-Spline Inner and Outer Axles Provide End-to-End Strength
Big 14.25-Inch Vented Rotors and Master Cylinder-Matched Dual-Piston Calipers

Deliver Industry Leading Stopping Power with Factory Brake Pedal Feel
Chromoly Tie Rod with 1-Ton Rod Ends is Designed for Off-Road Abuse
Currie Rock-Proof Nodular Iron Differential Cover
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Satin Black Powder Coat Finish for Long Lasting Protection
Fully Assembled and Ready to Install

Currie Extreme 60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 5.38 Gear Ratio - ARB Air Locker - CE-KF6503A53

$9,850.00

The Currie Extreme 60 front axle for 2007 thru 2018 JK/JKU, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The Extreme 60 front features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, 35-spline chromoly axles, and 1-ton inner knuckles and outer steering assemblies that are fitted with massive brakes and 8-lug hubs. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle assembly is a natural choice. See below for the full details.

Details:

70-Inch Width Provides Clearance for Large Tires
5.38 Gear Ratio
ARB Air Locker
High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
3.5 x .375-inch DOM Axle Tubes Deliver Industry-Leading Strength
Hardened Steel Rock Slider Skid Plate Glides Over Rocks
1-Ton Forged Inner Knuckles and Nodular Iron Outer Knuckles with 8-Lug Hubs

Deliver Maximum Strength for Hard Wheeling with Large Tires
Currie Chromoly 35-Spline Inner and Outer Axles Provide End-to-End Strength
Big 14.25-Inch Vented Rotors and Master Cylinder-Matched Dual-Piston Calipers

Deliver Industry Leading Stopping Power with Factory Brake Pedal Feel
Chromoly Tie Rod with 1-Ton Rod Ends is Designed for Off-Road Abuse
Currie Rock-Proof Nodular Iron Differential Cover
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Satin Black Powder Coat Finish for Long Lasting Protection
Fully Assembled and Ready to Install