Personal menu

Search

Filters

Products tagged with 'dana 60 front axle'

Currie HD60 Front Axle Assembly

Currie HD60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 5.38 Gear Ratio - Eaton ELocker - CE-KF6400E53

$7,750.00

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

65.375 in. Factory JK Width
5.38 Gear Ratio
Eaton ELocker
HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
Rock Slider Low-Friction Skid Plate Glides Over Rocks
3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
Currie Heavy-Duty Forged JK Inner Knuckles
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Currie Rock-Proof Nodular Iron Differential Cover
Satin Black Powder Coat Finish For Long Lasting Protection
Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)

Currie HD60 Front Axle Assembly

Currie HD60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.56 Gear Ratio - ARB Air Locker - CE-KF6400A45

$7,750.00

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

65.375 in. Factory JK Width
4.56 Gear Ratio
ARB Air Locker
HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
Rock Slider Low-Friction Skid Plate Glides Over Rocks
3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
Currie Heavy-Duty Forged JK Inner Knuckles
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Currie Rock-Proof Nodular Iron Differential Cover
Satin Black Powder Coat Finish For Long Lasting Protection
Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)

Currie HD60 Front Axle Assembly

Currie HD60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.88 Gear Ratio - ARB Air Locker - CE-KF6400A48

$7,750.00

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

65.375 in. Factory JK Width
4.88 Gear Ratio
ARB Air Locker
HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
Rock Slider Low-Friction Skid Plate Glides Over Rocks
3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
Currie Heavy-Duty Forged JK Inner Knuckles
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Currie Rock-Proof Nodular Iron Differential Cover
Satin Black Powder Coat Finish For Long Lasting Protection
Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)

Currie HD60 Front Axle Assembly

Currie HD60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 5.13 Gear Ratio - ARB Air Locker - CE-KF6400A51

$7,750.00

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

65.375 in. Factory JK Width
5.13 Gear Ratio
ARB Air Locker
HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
Rock Slider Low-Friction Skid Plate Glides Over Rocks
3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
Currie Heavy-Duty Forged JK Inner Knuckles
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Currie Rock-Proof Nodular Iron Differential Cover
Satin Black Powder Coat Finish For Long Lasting Protection
Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)

Currie HD60 Front Axle Assembly

Currie HD60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 5.38 Gear Ratio - ARB Air Locker - CE-KF6400A53

$7,750.00

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

65.375 in. Factory JK Width
5.38 Gear Ratio
ARB Air Locker
HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
Rock Slider Low-Friction Skid Plate Glides Over Rocks
3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
Currie Heavy-Duty Forged JK Inner Knuckles
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Currie Rock-Proof Nodular Iron Differential Cover
Satin Black Powder Coat Finish For Long Lasting Protection
Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)

Extreme 60 - JK High-Pinion Front Axle Assembly

Currie Extreme 60 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.88 Gear Ratio - Eaton ELocker - CE-KF6503E48

$10,100.00

The Currie Extreme 60 front axle for 2007 thru 2018 JK/JKU, is designed for severe off-road use with tires up to 42 inches and V8 horsepower. The Extreme 60 front features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, 35-spline chromoly axles, and 1-ton inner knuckles and outer steering assemblies that are fitted with massive brakes and 8-lug hubs. If you seek out the most challenging routes and toughest obstacles to conquer, the Extreme 60 axle assembly is a natural choice. See below for the full details.

Details:

70-Inch Width Provides Clearance for Large Tires
4.88 Gear Ratio
Eaton ELocker
High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
3.5 x .375-inch DOM Axle Tubes Deliver Industry-Leading Strength
Hardened Steel Rock Slider Skid Plate Glides Over Rocks
1-Ton Forged Inner Knuckles and Nodular Iron Outer Knuckles with 8-Lug Hubs

Deliver Maximum Strength for Hard Wheeling with Large Tires
Currie Chromoly 35-Spline Inner and Outer Axles Provide End-to-End Strength
Big 14.25-Inch Vented Rotors and Master Cylinder-Matched Dual-Piston Calipers

Deliver Industry Leading Stopping Power with Factory Brake Pedal Feel
Chromoly Tie Rod with 1-Ton Rod Ends is Designed for Off-Road Abuse
Currie Rock-Proof Nodular Iron Differential Cover
Currie Heavy-Gauge Laser Cut Brackets
Upgraded 1350 Pinion Yoke
Satin Black Powder Coat Finish for Long Lasting Protection
Fully Assembled and Ready to Install

Popular tags